SteraMist™ Powered by Binary Ionization Technology®
The safest, most effective disinfection system available — EPA registered for use as a hospital-healthcare disinfectant. Branch Restoration is a certified SteraMist Advantage Facility.
(917) 855-4397Complete Room Disinfecting System
- EPA Registered (Registration Number 90150-2) for use as a Hospital Healthcare Disinfectant
- Effective Broad-Spectrum Surface Disinfection
- Reaches Surfaces that Regular Disinfectants Can't
- Eliminates Bacteria and Deodorizes
Benefits of SteraMist™
Advantages
- Economical and easy to use
- Non corrosive
- Leaves no residue
- No mixing or diluting required
- Does not damage electronic equipment*
- When you re-enter the room, you can "Smell the Clean"
Versatility
- SteraMist™ Environment System — A multi-applicator, fully configurable, fogging system
- Scalable to treat multiple spaces simultaneously
- Remotely controlled, push-button, observable operation
Efficacy
- EPA registered (registration # 90150-2) for use as a hospital-healthcare disinfectant
- Fast acting biological deactivation of problem microorganisms
- Eliminates bacteria on hard, non-porous surfaces*
- Reduces the risk of cross contamination of bacteria on hard, pre-cleaned, non-porous surfaces*
SteraMist™ Environment System
The SteraMist™ Environment System is a transportable remotely controlled system that provides complete room disinfection of a sealed space, up to 103.8m³ (3,663 ft³).
Individually, each remote applicator can be used to treat a space of approximately 34.6m³ (1,221 ft³). Multiple SteraMist™ Environment Systems can be used simultaneously to accommodate larger spaces.
Features
- Application time of approx. 8 min. to reach a concentration of .5 ml per cubic foot to treat a 1200 ft³ space
- 15 minute contact time once dose concentration is achieved
- Room is safe to enter within minutes following aeration, once hydrogen peroxide is below 1 ppm
- Mechanical cleaning that makes whole room disinfecting easier
- 2-4 micron particle disinfects hard to reach areas
- Dimensions
- 1.2m L x 0.61m W x 0.61m Depth (approx. 47" x 24" x 24")
- Weight
- Approx. 38.5kg (approx. 85 lbs)
- Patient room treatment time
- Just over 75 minutes including application time, contact time, and aeration
- Warranty
- 12 month warranty on parts and labor
SteraMist™ Surface Unit
The SteraMist™ Surface Unit is a fully portable fast-acting, hand-held, point and spray disinfection system. It is the safest and easiest process to make certain that your facilities and assets are disinfected to the maximum extent possible.
This single applicator surface unit enables disinfection of all surfaces — including high touch, sensitive medical equipment and electronics. The room is safe to enter within minutes after the Activated Ionized Hydrogen Peroxide (AIHP) mist has been applied.
Features
- 5 second application time, 7 minute contact time, quick room turnover*
- Lightweight, easy to transport, and capable of achieving reliable disinfection
- Easily incorporated into current cleaning procedures and protocols
- Does not require heating, ventilation, or air conditioning systems to be turned off
- 2-4 micron particle disinfects hard to reach areas
- Dimensions
- 0.64m L x 0.56m W x 0.38m D (approx. 25" x 22" x 15")
- Weight
- Approx. 22kg (approx. 48 lbs)
- Full room treatment time
- As low as 15 minutes
- High touch treatment time
- Approx. 8 minutes
- Warranty
- 12 month warranty on parts and labor
*Minimum of 5 seconds over 1 ft² treatment area
SteraMist™ Binary Ionization Technology® (BIT™)
Binary Ionization Technology® (BIT™) and its SteraMist™ platform was developed in conjunction with the Defense Advanced Research Projects Agency (DARPA) and a large U.S. defense contractor, in response to Amerithrax (anthrax attacks) post 9/11/2001.
BIT™ is a patented two-step process that activates and ionizes a 7.8% hydrogen peroxide solution. The fine mist is called Activated Ionized Hydrogen Peroxide (AIHP). AIHP contains a high concentration of Reactive Oxygen Species (ROS), consisting mostly of hydroxyl radicals, which damages pathogenic organisms through oxidation of proteins, carbohydrates, and lipids.
TOMI Environmental Solutions' testing has confirmed the applicability and effectiveness of the SteraMist™ BIT™ system on a variety of infectious pathogens, resulting in EPA registration of Binary Ionization Technology® (BIT™) for use as a hospital-healthcare disinfectant as a combination solution and application technology. (EPA registration # 90150-2)
"The choice of a disinfectant is a difficult one. The product needs to fit the environment and assure complete disinfection. It has to be compatible with other agents in use, be safe and odor free. It has to protect and disinfect surfaces such as keyboards and monitors and other equipment with no damage. It also has to have rapid turn-around time. The SteraMist™ BIT™ Activated Ionized Hydrogen Peroxide (AIHP) meets those criteria with a relatively low cost and ease of use."
Need SteraMist Disinfection Services?
Contact Branch Restoration for certified SteraMist infection control services throughout the NY Metro area.